Description
The AML(RES-PB) has an outer metal ring which must first be plastered into the ceiling. The LED is then inserted into the opening and is held in place by a powerful magnet which is incorporated into the plaster-in ring. Once in position the LED bezel sits flush with the plasterboard ceiling giving it a trimless effect. The plaster-in ring is available as a single or twin version.
The AML(RES-PB) has a 30° tilt and 360° rotation. The optics are set back from the front bezel by 20mm which provides a unique appearance. This recess baffle is finished in black as standard (white is available if preferred – ordering code /WR)
Constant development of this range has now produced exceptional versions with the release of the AML(RES-PB)Ra98 & AML(RES-PB)WM ranges. The AML(RES-PB)Ra98 comes as standard with a CRI of 98 with the R9 (red) spectrum value of 98, giving unbeatable colour rendering of near daylight quality. A further option is the WarmdiM version with a CRI of 94 which at 100% output has a colour temperature of 2650K, but reduces to 1800K as you dim towards 0% output. This gives the warming fade of a halogen lamp with the efficiency benefits of an LED fitting on top of excellent colour consistency.
The fitting is sealed to IP54 as standard with the option to upgrade to IP65. It can also have a 1 hour fire rating when installed with a fire plate or approved hood in accordance with recommendations as stated in our current installation instructions.
LED’s are run via one driver which can be up to 20m from the luminaire making installation simple. Control options available: DALI, 1-10v, mains dimming and non-dimming with maintained or non- maintained emergency packs.
